Call
Message
Optional unit
Automatic load_unload bar,
Tension released
Air scissors (wire dia. over 0.3mm)
Flat cutter, Bifilar winding,
Wire broken sensor,Servo conveyor,
90º wire bending,Bobbin end holding
Wire material:
Copper wire, Aluminium wire
Tin wire, Insulation wire, Nylon wire
Product-related:
Lens coil, Transformer coil, Relay coil
Inverter coil,Valve coil,Ignition coil,
Adapter coil, Switch coil
Car horn coil, Primary coil, Mirror coil
and related coil
Machine-related:
Automatic machine line, Pin inserting
Winding machine, Soldering machine
Spot welding machine, OEM machine
Testing machine, Assembly machine
Coil taping machine
Model No. DSW-4208P-TP
8 Spindles automatic coil winding machine
with coil taping unit
Feature:
- This machine has CE marking.
- This machine is an automatic 8 spindle bobbin coil winding machine.
- Machine equips with CNC 4-axis AC servo motor transmission system, accuracy position control.
- This machine has installed automatic safety door closing and opening to prevent damage during operation
- Coil winding machine equips with built-in 8 spindles taping mechanism for tape taping during wire winding.
- Coil winding machine equips with Air-cutter or flat cutter for thick wire over 0.3mm to reduce remain wire on pin of bobbin.
- Automatic continuous winding makes cycle times reduce.
- It is equipped with PLC system, touch panel and AC servo motor.
- Parameter (program) set thru PLC system and 10″ touch panel.
- Quickly change tooling is offered in machine, it does not need tools to change it for time saving and keep precision.
- Machine equips with a Nozzle mechanism to rotates the nozzle 0, 90, 120 degrees for wire wrapping (binding) on pin of coil (bobbin) .
- Single wire or Multi-wires (bi-filar ) winding is available.
- Machine can perform perfect layer winding.
- Machine equips with quality mechanism tensioner controls winding quality
- Machine equips with a set of flexible wire gripper, it will not have residual remain wire keeping for cost saving.
- Password function is provided to prevent program from modified by non-related person.
| Controller | CNC 4 Axles AC Servo Motor |
| Storage | USB build-in 512MB cache memory |
| Spindles | 8 spindles, pitch: 42mm |
| Speed | Max 18,000 rpm, CW/CCW |
| Accuracy of Motor | 1 revolution/360° |
| Accuracy of angle | +/-0.5° |
| Nozzle movement | X axle（F/B）90 mm, unit 0.01 mm Y axle（L/F）80 mm, unit 0.01 mm Z axle（U/D）50 mm, unit 0.01 mm |
| Wire dia. | 0.03~0.5 m/m |
| Max winding diagonal | 35m/m |
| Max winding length | 70m/m |
| Wrap speed | Max 150 turns/min |
| Wrap angle | 0°、90°、120° |
| Tape OD | 50~130 m/m |
| Tape width | 2~22 m/m |
| Power supply | 1phase/220V/50 or 60HZ |
| Power consumption | 5KVA |
| Air pressure | 4~6kgf/cm2 |
| Machine Size | 1000(L) x 1000(W) x 1400(H)m/m |
| Machgine weight | 600kgs±10 |
