Optional unit
Automatic load_unload bar,
Wire twister,Tension released
Air scissors (wire dia. over 0.3mm)
Flat cutter, Bifilar winding,
Wire broken sensor,Servo conveyor,
90º wire bending,Bobbin end holding
Heater, Alcohol for wire bonding
Copper wire surface stripping unit

Wire material:
Copper wire, Aluminium wire
Tin wire, Insulation wire, Nylon wire

Lens coil, Transformer coil, Relay coil
Inductor coil, Inverter coil,Valve coil
Ignition coil, Adapter coil, Switch coil
Car horn coil, Primary coil, Mirror coil
Air coil, Voice coil and related coil

Automatic machine line, Pin inserting
Winding machine, Soldering machine
Spot welding machine, OEM machine
Testing machine, Assembly machine
Coil taping machine

Model No. DSW-8008D

8 Spindles Automatic Coil Winding Machine + bobbin holding unit


  • This machine has CE marking.
  • This machine is an automatic 8 spindle bobbin coil winding machine.
  • Machine equips with CNC 4-axis AC servo motor transmission system, accuracy position control.
  • This machine has installed automatic safety door closing and opening to prevent damage during operation.
  • Coil winding machine equips with built-in bobbin edge holding (tail supporting) mechanism to avoid bobbin shape deformed  after winding.
  • Coil winding machine optional equips with Air-cutter for thick wire over 0.3 mm to reduce remain wire on pin of bobbin.
  • Automatic continuous winding makes cycle times reduce.
  • It is equipped with PLC system, touch panel and AC servo motor.
  • Parameter (program) set thru PLC system and 10″ touch panel.
  • Quickly change tooling is offered in machine, it does not need tools to change it for time saving and keep precision.
  • Machine equips with a Nozzle mechanism to rotates the nozzle 0, 90,  120 degrees for wire wrapping (binding) on pin of coil (bobbin) .
  • Single wire or Multi-wires (bi-filar ) winding is available.
  • Machine can perform perfect layer winding.
  • Machine equips with quality mechanism tensioner controls winding quality
  • Machine equips with a set of flexible wire gripper, it will not have residual remain wire keeping for cost saving.
  • Password function is provided to prevent program from modified by non-related person.
  • Safety door open/closed automatic
ControllerCNC 4 axles AC servo motor driven
StorageFlash Drive and 512MB fast-access memory, program is compatible with IBM PC
Spindles 8 spindles, Pitch: 80m/m
SpeedMax 9,000 rpm CW/CCW
Accuracy of Motor+/-0.5
Nozzle movementX axle(F/B)100 mm, unit 0.01 mm
Y axle(L/F)80 mm,unit 0.01 mm
Z axle(U/D)50 mm,unit 0.01 mm
Wire dia. 0.02 – 0.8 mm
Max. Winding Diameter70m/m
Max. Width90m/m
Wrapping speed Max 150rpm
Wrapping Angle 0°、90°、120°三種角度
Nozzle3phase/220V50/60 HZ
Power consumption5KVA
Air pressure4~6kgf/cm2
Machine size1200(L)x900(W)x1400(H) mm
machine weight850kgs±10