Optional unit

*Conveyor: Servo type, Chain conveyor,
modular conveyor, belt conveyor
*Any brand of Testing devices
*Mechanical robot pick and place mechanism
*RFID reader + sensor, Remote terminal unit,
*SCADA(Supervisory control and data acquisition)

Lens coil, Inverter coil,Valve coil
Ignition coil, Adapter coil, Switch coil
Car horn coil, Primary coil, Mirror coil
Solenoid, related coil

Automatic machine line,
OEM machine
Testing machine, Assembly machine

Model No. DSW-4208HFD

2 in 1 8 spindles automatic coil winding + dip soldering + heater


  • This machine is a 2 in 1 automatic 8 spindle coil winding machine + dip soldering bath + 8 pcs of hot heater for wire bonding in a cycle.
  • Machine equips with CNC 4-axis AC servo motor transmission system, accuracy position control.
  • This machine has installed automatic safety door closing and opening to prevent damage during operation.
  • A bobbin end edge holding mechanism to avoid deformed after winding.
  • Air-cutter for thick wire over 0.3mm to reduce remain wire on the pin of the bobbin.(Optional)
  • Automatic continuous winding makes cycle times reduce.
  • It is equipped with PLC system, touch panel, and AC servo motor.
  • Parameter (program) set thru PLC system and 10″ touch panel.
  • Quickly change tooling is offered in the machine, it does not need tools to change it for time-saving and keep precision.
  • Machine equips with a Nozzle mechanism to rotates the nozzle 0, 90,  120 degrees for wire wrapping (binding) on the pin of the coil (bobbin).
  • Single wire or Multi-wires (bi-filar ) winding is available.
  • The machine can perform perfect layer winding.
  • Machine equips with quality mechanism tensioner controls winding quality
  • Machine equips with a set of flexible wire gripper, it will not have residual remain wire keeping for cost saving.
  • Password function is provided to prevent the program from modified by the non-related person.

ControllerCNC 4-axis, AC servo motor
StorageUSB portable disc, 512MB cache memory,
Spindles8 spindles,pitch: 42m/m
SpeedMax 18,000 rpm CW/CCW
Angle of rotation 1 revolution/360o
Accuracy of angle+/-0.5
Nozzle movementX axle(F/B)90 mm, unit: 0.01 mm
Y axle(L/F)80 mm,unit: 0.01 mm
Z axle(U/D)50 mm,unit 0.01 mm
Wire dia. 0.02 – 0.5 mm
Max winding diagonal35m/m
Max winding length70m/m
Wrapping speedMax 150 rpm
Power supply3 phase/220v/50/60 HZ
Power consumption3KVA
Air pressure4~6kgf/cm2
Machine size900(L)x700(W)x1350(H) mm
mahcine weight600kgs±10