 |
 FEATURES |
Two different wire diameters can be wound in the same
time.
4 Spindles, AC servo motor control.
Tooling can be changed easily for different models.
3 winding angles, 0o, 90o,
and 120o, for winding in different angles
in one operation.
Automatic wire assortment, leaving no residual wire.
Program Editing in BASIC.
Multiple fine wires threading for enhancing stability. |
|
SPECIFICATION
:
|
| Control method |
CNC, Computer numerical
Control |
| Storage |
Flash Drive and 256M fast-access memory,
program is compatible with IBM PC |
|
Spindle Pitch |
80mm |
| Speed |
Max 9,000 rpm |
| Accuracy of Motor |
+/- 0.5o |
| Guide Pin Movement |
X
axis (back & forth) 90mm,
at 0.01mm
Y axis (horizontal) 80mm, at 0.01mm
Z axis (Vertical) 50mm, at 0.01mm |
| Applicable wire Diameter |
0.02 ~ 0.5 mm |
| Max. Winding Diameter |
70 mm |
| Max. Width |
80 mm |
| Wrapping speed |
Max 150 rpm |
| Wrapping Angle |
0oĦB90oĦB120o |
| Power supply |
Single-Phase 220V or rated voltage,
50/60 HZ |
| Power consumption |
3KVA |
| Air Supply |
4~6 kcf/cm2 |
| Machine Dimension |
900( L ) x 700( W ) x 1350( H ) mm |
|
Net Weight |
600kg |
| Packing dimension |
1390( L ) x 1300( W ) x 1730( H )
m/m |
|
Gross weight |
750kg |
|
 |
